Front Lower Rearward Control Arm with Ball Joint (06-10 RWD Charger)

Description

Enhanced Suspension Component. The Front Lower Rearward Control Arm with Ball Joint is a critical suspension part engineered to provide a reliable connection and movement between the vehicle chassis and front wheels. It replaces the original equipment, improving handling, maintaining proper wheel alignment, and ensuring driver safety through enhanced durability and performance. This assembly addresses common failure points by upgrading the bushings and ball joint for longer-lasting function under demanding driving conditions.

_x000D__x000D_

Construction and Appearance. Manufactured from high-strength steel using casting and forging techniques, this control arm offers structural integrity and durability. The black painted finish provides resistance to corrosion and wear. It features heavy-duty rubber bushings with an oversized two-piece design for better load distribution, a polymer bearing in the pre-greased ball joint, and includes a protective dust boot to extend service life.

_x000D__x000D_

Installation. Designed for straightforward installation without the need for specialized tools or a shop press, this assembly allows technicians and experienced DIYers to complete the replacement efficiently with no drilling or modification required, ensuring a seamless fit on the specified vehicle.

_x000D__x000D_

Warranty. This suspension control arm assembly includes a limited warranty that ensures reliability and quality assurance.

_x000D__x000D_

Application. Specifically engineered to fit 2006 through 2010 rear-wheel-drive Charger models, providing an improved design suited for standard suspension systems during this production period.

CA Residents: WARNING: Cancer and Reproductive Harm

_x000D_
• Upgraded Repair Featuring Oversized, Heavy-Duty Two-Piece Bushings

_x000D_

• Cost-Effective Solution Reducing Maintenance Costs and Increasing Vehicle Uptime

_x000D_

• Position-Specific Design for Front Left Lower Rearward Control Arm

_x000D_

• Simple Installation Without Special Tools or Shop Press Requirement

_x000D_

• Includes Control Arm, Ball Joint, and Mounting Hardware

_x000D_

• Steel Construction with Casting and Forged Manufacturing Process

_x000D_

• Black Painted Finish for Corrosion Resistance

_x000D_

• Pre-Greased Ball Joint with Polymer Bearing Material

_x000D_

• Ball Joint with Press-In Mounting Type and Threaded Stud

_x000D_

• Mounting Hole Diameter of 16 mm and 14.3 mm

_x000D_

• Control Arm Maximum Length of 338.3 mm and Width of 78 mm

_x000D_

• Thread Specifications: 14 mm Diameter, 1.5 mm Pitch, Clockwise Direction

_x000D_

• Reinforced Rubber Bushings with 16 mm and 14.3 mm Inside Diameters

_x000D_

• Dust Boot Included for Ball Joint Protection

_x000D_

• Locking Nut Included; Castle Nut and Cotter Pin Not Included

_x000D_

• Fits 2006-2010 RWD Charger Models

_x000D_

Control Arm Type	Fixed
Control Arm Placement	Front Lower